FASE 1: PREPARATION

SURFACE PREPARATION

1. SURFACE REPAIR

HOLES : You should repair with hydraulic cement. We recommend use “Rapid Set” products

CRACKS & CONTROL JOINTS: Repair and fill them with an appropriated epoxy filler.

CONTRUCTION JOINTS & COLD JOINTS: Must be honored. We recommend use appropriate metal dividers.

2. CONCRETE GRINDING

Grind the concrete floor with metal diamond #30/40 to profile the concrete and clean it for any glue, paint, thin set and residual.

Vacuum the area and clean it with alcohol

3. OPTIONAL

For surfaces that require leveling or extensive repair more than 1/4” thickness, we recommend to use self-leveling ULTRAPLAN  underlayment or similar for interior floors. And for exterior floor MAPECEM 102 or similar. Read specs for the right priming, mixing and installation

BONDEX OR FASTEX

Epoxy or Polyurea primer – With silica sand – 1 coat

NOTE

BLACK BLOK IS REQUERED FOR METALLIC FINISH

FASE 2: CHOOSE THE STYLE

MICRO-CEMENT LOOK

MICRO-CEMENT LOOK

1. CEMENTINA TROWEL: Decorative resin mortar - 2 coats

2. BOLTEX: Epoxy body coat 100% solid
additional impact protection - 1 coat- 100 sqf/gallon

3. ULTRASEAL : Topcoat polyurea- Low gloss, medium gloss and gloss- 2 coats

POLISHED CONCRETE LOOK

POLISHED CONCRETE LOOK

1. CEMENTINA SPRAY: Decorative resin mortar - 1 coat

2. EZ DYE: Spectrum color - 1 coat

3. BOLTEX: Epoxy body coat 100% solid
additional impact protection - 1 coat - 100 sqf/gallon

4. ULTRASEAL: Topcoat polyurea - Low gloss, medium gloss and gloss - 2 coats

MONOCHROME LOOK

MONOCHROME LOOK

1. CEMENTINA SPRAY: Decorative resin mortar - 1 coat

2. EZ SOLID COLOR:1 coat

3. BOLTEX: Epoxy body coat 100% solid
additional impact protection - 1 coat - 100 sqf/gallon

4. ULTRASEAL: Topcoat polyurea - Low gloss, medium gloss and gloss - 2 coats

METALLIC LOOK

METALLIC LOOK

1. BOLTEX: Epoxy body coat 100% solid
additional impact protection - 1 coat- 100 sqf/gallon

2. NEWGAIN: Protective coat - 2 coats