DEVELOPED FOR AREAS REQUIRING QUICK CURE

Do not scrape the sides or bottom of the container. Use only the material that flows naturally out of the container. Also, do not turn the container upside down and leave on the floor to drain. Doing so may result with unactivated material from the sidewall of the container being applied. This will cause soft spots in the coating.

MIXING

• Thoroughly mix each component separately before combining.
• If only using part of a container, be sure to use a separate mixer blade for each component to avoid cross contamination.
• NOTE: The Part B component uses a moisture scavenger in its formulation to pull out any moisture which may have entered during the filling process. When this occurs, the scavenger settles out as a solid in the container. There is no need to try and mix this hard settled material into the liquid. Keep your paddle mixer above the packed out scavenger and pre-mix as normal. It is still required to pre-mix the material prior to use. Another option would be to transfer the material to a different mixing bucket, then mix as normal.
  Pour the Part A and Part B components together in a clean, dry five gallon container and power mix at 500-700 rpm for a minimum of two minutes. Do not entrain air into the mixing. Do not mix more material than can be applied in 20-25 minutes.
  If using less than a full container, combine the components using a mixing ratio of 1:2 by volume, Part A to Part B.

TINTING (Clear)

Tinting is only to be done after Part A and Part B have been thoroughly mixed. If tinting, add 12% by volume of the Colorant (1 quart of tint per 2 gallons of activated material). Power mix until a uniform color is achieved.
If there are any questions on the tint process of this product, please consult our technical service department.

ROLLER

Use only phenolic core, solvent resistant, natural or synthetic fiber roller covers. ¼” to 3/8” nap are acceptable, thicker nap may cause bubbling of the coating.

BRUSH

Inexpensive natural fiber chip brushes are suggested – 2” to 4” width depending on the application. These will be one-time use items.

CLEAN UP

Use Acetone or Xylene before product cures.

Product is sold CLEAR.

All the major components or compounds used to make FASTEX are ISO9000 certified. What are the standards established by the International Organization for Standardization (ISO) to guarantee quality in the production of goods or services.

WARNING: Keep away from sparks, heat, and open flame. Use with adequate ventilation. Prolonged or repeated breathing vapor or spray mist can cause headache, nausea, dizziness or confusion. This product can be harmful if inhaled, swallowed, or absorbed through the skin.

HAZARDS: Avoid breathing vapor, spray mist or contact with the skin. Use only with adequate ventilation during mixing, application and drying. Use face protection, gloves and full protective clothing to prevent contact. Wear appropriate self-contained respiratory equipment when handling. Use only with recommended thinners and cleaners. Keep away from heat, sparks, arc, and open flame.

FIRST AID: In case of contact with skin, flush with water and get immediately medical attention. For eyes, immediately flush with plenty of water for at least 15 minutes and get immediately medical attention. In case of exposure of high concentrations of fumes, remove to fresh air and get immediately medical attention. If swallowed, get immediately medical attention. Do not induce vomiting. See product material safety data sheet for further details on contents and procedures to follow.

PRECAUTIONS: Improper use and handling of this product can be hazardous to health or cause a fire. Consult all Federal Regulations concerning occupational safety and health standards and any other applicable Federal, State, and Local regulations on safety practices in coatings operations. Necessary safety equipment must be used, and proper ventilation requirements carefully observed, especially in confined or enclosed spaces to prevent build-up of vapors.

SPILLAGE: Extinguish all sources of ignition. Use absorbent cleanup materials. Prevent from entering sewers or waterways.

FIRE: Blanket flames with dry chemical, carbon dioxide, or foam. Wear self-contained breathing apparatus.

STORAGE & DISPOSABLE: Store in cool, well, ventilated area. Keep containers closed and upright when not in use to prevent leakage. Dispose of in separate closed metal container in accordance with all applicable regulations.

CLEAN UP: Clean up the equipment with xylene, alcohol or other environmentally safe solvent. Dispose of waste solvent according to local environmental regulations. CAUTION: These solvents may be flammable. Keep away from all sources of ignition. Clean skin with soap and warm water. Do not use abrasive cleaners which may cause irritation.

EXCLUSION OF WARRANTIES: Trends Design USA, Inc (POLICRETE) makes no warranties, expressed or implied, in connection with the sale of (this)(these) product(s) and all implied warranties of merchantability and fitness for a particular purpose are excluded and shall not apply to the goods sold. Trends Design USA, Inc (POLICRETE) employees, agents, and/or representatives may have made oral statements about the merchandise sold. Such statements do not constitute warranties and are not a part of the contract for sale of the products sold.

LIMITATION OF REMEDIES: Whether for breach of contract or warranty, negligence of Trends Design USA, Inc (POLICRETE), strict liability or otherwise Trends Design USA, Inc shall not be liable for anu incidental, special, or consequential damages whatsoever. The sole remedy available from Trends Design USA, Inc. is the refund of the contract price for the goods for which liability is claimed.

SEVERABILITY: If the above exclusion of warranties provision, or any part thereof, should be held invalid or unenforceable, the limitation of remedies provision shall apply in full force and effect. If anu provision of the limitation of remedies clause should be held or unenforceable, all other provisions in that clause shall nevertheless continue in full force and effect.